last steps

Step 9: Setting The Roof Trusses

Begin the rooftop by introducing the end trusses. Note that the plywood siding is nailed on before the truss is raised. Secure these with 3-in. deck screws crashed into the top divider plate. A focal 2 x 4 harmony hardens the sheathing.

Step 10: Setting The Roof Trusses

At that point, introduce the remaining rooftop trusses. Set one truss over every divider stud and secure it by driving 3-in. deck spoils through the top divider plate.

Step 11: Setting The Roof Trusses
Spread the trusses with 1/2-in. CDX plywood, then nail on the black-top rooftop shingles.Eight packs are expected to finish this rooftop.

Step 12: Finishing Touches

Introduce punctured hardboard to the allotment divider in the device stockpiling region. Secure it with 1-1/4-in. screws.

Step 13: Finishing Touches

Make the 5-ft.-long transom window from a wooden casing and a solitary bit of glass. Introduce it over the end entryways.

Share on Google Plus

About nrelahindur

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.